Tuesday, 20 December 2016

Why Are Prefabricated Houses Great For An Eco- Friendly Living?

Here's a question for you- can a house save our planet? Then the answer is, yes! A well- planned prefabricated house can definitely do the trick for you!
In this time of growing population all over the globe, people have been looking out for green options of living. 
When it comes to prefabricated homes, conventional construction loses the race!

                                      


Here's why conventional construction ain't eco- friendly:

The construction style of these homes are terrible- it's all done on- site where there's an abundant amount of pollution to kill our planet. As per a research in England, 32% of landfill waste was reported which is not a good number. Considering the quick development in cities like Bangalore, India and so on, prefabricated homes in Bangalore is a great option to adopt to or else, the conventional style is going to ruin it for all.

Now, the question is- why prefabricated houses?

Prefab homes take control over air pollution: A recent WHO report said, 98% cities in middle and low-income countries don't meet the air quality guideline. Also, 56% of the problem can be solved by the construction of prefabricated houses. As mentioned earlier, the conventional style of the building is constructed on- site implying, there's immense pollution caused during construction. Ont the other hand, prefab homes are constructed in an enclosed construction system or off- site construction system. This prevents poisonous gasses from entering the environment and reduces chances of pollution. 

Prefab reduces waste pollution: Due to the modern civilization, waste pollution has taken birth and has become huge now which is why our planet is facing so many difficulties today. Here, prefabricated houses can do the trick. Since, most of the construction is done off- site, there are much software which architects can make use of to prevent even an inch of wastage, preventing waste pollution!

Also, prefab homes have smart features which shall make a huge difference to our environment:

1. Less energy needs
2. Low carbon emission
3. The adoption of reducing, reuse, recycle!

Energy efficiency: Another benefit of prefabricated houses is it's energy efficiency. The energy efficiency is so beneficial that modern architecture benefits from it in the following ways- 
Net-zero water and energy use strategies.

  1. Airtight construction.
  2. High-efficiency heating and cooling to passive solar.
  3. Radiant heat flooring.
  4. Plumbing consists of corrosion-resistant PEX tubing instead of copper pipes.


“Off-the-grid” package with a rainwater catchment roof and storage cistern.
Reduce, reuse, recycle: The entire prefab home construction gives complete freedom to adapt to this method of using materials because of it's enclosed construction style. Materials like leftover plastics can also be used to help in recycling. The aim of green building is that we can reduce usage of unnecessary materials which damage the environment and to keep our planet clean and green.
 The benefits of eco- friendly houses.

Here are a few additional perks which shall inspire your to build yourself a green home:

  1. Lower building material cost 
  2. Less maintenance cost.
  3. Natural lighting
  4. Natural temperature regulation
  5. Healthy indoor environment 
  6. Organic and chemical-free building materials
  7. Highly-improved air quality and better emission process
  8. Don't regret, you can always build yourself a prefab home in India!

Thursday, 15 December 2016

Can You Afford To Build Yourself A Shipping Container Home?


On a global level, there's been a rise in the home prices. It's been very difficult for all to get a good property on the property market. Prices have hiked over 8% in this year alone.


It's not just about the property anymore, it's about the house building prices as well. Yes, it's getting expensive however, nobody is really making money out of it. 

This leaves people wondering whether they can afford their own home or not. 

That's how the concept of shipping container homes came- they're affordable, effective and ideal for most of the population.

                     

“Cant I afford a container house?

You need to know 2 things if you need to answer this question- the budget and the expected cost of your dream home.

Working out the budget is very simple- it's all about how much you have in your bank account!
However, the expected cost can be proven to be tricky. Especially, if you have no idea about how to go about the entire process of building yourself your container home. 

Here, comes the breaking down the bit where you need to drill down into each and every intricate detail of your container house- the cost of the land, taxes and purchase fee and so on. 


Professional fees and land fees are the 2 most major expenses you shall have. Post this comes to the insulation fee, interiors and so on. Once you've carefully calculated the expected cost of your container house, you can take the process forward. 

Here are 2 great cost saving tips you can make use of while building your dream shipping container home:

1. It's rightly said, the smaller, the better

It's an obvious tip however, it's a great hack for you to adopt while building the shipping container home. Your designer has to put a lot of thought while planning and designing your shipping container house. One thing must be kept in mind- stick to your plan. If you do not, it's going to be very expensive to re- do the home. Plan your shopping container houses such that you do not waste any space. Remember, people can even make a comfortable living in the smallest of spaces. If you choose to be lavish, you're going to spend a lot on your shipping container houses which shall not be worth it. Bottom line being, using just the right amount- neither too much nor too little!

2. Make sure you make use of good materials

It's a myth that good quality equals expensive end- products! The reason why good quality is recommended is to prevent any expensive repairs for later. While designing your container homes, try paying attention to the sizes you need for each material. For instance, drywall for insulation and so on. 
In the end, shipping container homes are very affordable with regard to living spaces if only one carefully plans everything out. Appropriate measures, thorough planning and so on can reduce further costs! 

Tuesday, 6 December 2016

5 Ways To Insulate Your Shipping Container Homes

Before getting to the point, here's a question you need to ruminate upon- do you need your container homes to be insulated or not? Yes, insulating your shipping container home is important. Also, NO insulating your home may seem to be a cheaper, more attractive and less time consuming choice. However, this ain't the right solution for the long run!

If you choose not to insulate your container home, not only with your home experience experience climates like Sahara hot or Arctic cold, your home will also be open to condensation, which shall lead to intense corrosion or mold.

Now that you've got an idea why insulation is important, you can carry on reading the blog!

Climate- Climate- Climate!

Remember one thing, when it comes to methods of insulation, it comes down to one very important thing that it completely depends on your climate! For instance, you're living in someplace which is extremely cold- insulation is a must however, to keep it warm. Also, to keep your container home from getting condensed. If this weather is prone to a wet winter- rainy and moist in nature, you must spray foam insulation to create a vapor barrier. However, if it's hot, not much insulation will be needed. However, the focus should be upon the designing of your insulation around keeping it cool. 

There are 5 major options you can choose from while you insulate your container homes:

1. Foam insulation

If your budget is low- go for spray foam insulation. As mentioned above, it acts as a vapor barrier, preventing corrosion and mold. It's the quickest method of insulating one's shipping container home. Also, it's got the highest rating amongst all the other methods and most importantly, it's a very flexible method as you can reach the most remote parts too! Spray foam insulation can be applied both, on internal and external walls of one's container home. You can also spray it underneath your container home to prevent ground creeping into your container homes. Once the foam sets, you can decorate your dream home in whichever way you wish to. 

    Also Read: Design Your Prefab Home      

2. Insulation panels

It’s the most DIY friendly type of insulation. Also, like blanket insulation- it needs stud walls to fit. Panels can be purchased and fit to size in between the stud walls. Panel insulation is quicker to fit in comparison to blanket insulation. Also, it has high insulating value for it's small depth. 

3. Blanket insulation

Also called roll insulation, it's a DIY friendly type of insulation which is the cheapest insulator amongst the mentioned methods. It's procedure of fitting is the same as the insulation panels and can placed in the gaps very quickly. The most common blanket insulation is rock wool or mineral. 

If the money is of prime concern, go for this method!

4. Eco- friendly

Why do people even live in shipping container homes? Well, that's because it leads to an eco- friendly and sustainable living. So, what's better than using eco- friendly insulation to insulate your lovely home? 

Here are a few materials you may make use of:

a. Wool insulation- It's similar to blanket insulation. However, it uses natural sheep wool which is a renewable source. 

b. Cotton insulation- Not only is it made out of recycled cotton clothes, it's also similar to roll insulation. However, it's eco- friendly, natural and a renewable source.

c. Living roof- It's not a direct method of insulation. However, it shall hugely help your container home get cooler during the summers!

d. Mud walls- The usage of mud walls has been since time immemorial. It can also be used to build houses. However, it can only be made useful in areas with scanty rainfall. All you need to do is use some water to stick the mud- the mud can be stuck on the walls and the roof too.

5. Construction

The last but not the least method of insulating your container homes is by constructing it in that fashion! Design your home such that it heats/ cools itself. You can have small windows on either sides of the container home to allow ventilation and so on.

In the end, the best insulated container homes are the ones which use multiple methods to insulate themselves. Every method has it's benefits and drawbacks- this is the only way in which there can be an increase in the benefits and left out with no drawback at all!